| Customization: | Available |
|---|---|
| After-sales Service: | 1year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Name | Model | Technical Specification | Unit | Qty |
| Drilling Rig | XJ550 | drilling depth: 2000m (4-1/2" DP) max. hood load: 1350KN 156tons rated power: 550HP mast height: 32m racking board height: 16m traveling system: 5×4 carrier drive: 10×8 drill line dia.:φ26mm transportation size: 19×3.2×4.5m max. drive speed: 45km/h main rig unit working temp: -20ºC-45ºC |
|||
| A | Main rig | ||||
| 1 | Carrier | 10×8 | carrier drive: 10×8 climbing degree: 26% approaching/depart angle: 26°/18 Minimum clearance: 311mm min. turning radiu: 19.5m |
||
| 1.1 | Truck frame | c/w frame, mud fender, raising cylinder base and hydraulic jack beam. | set | 1 | |
| 1.2 | Axle | CQ | joint | 5 | |
| 1.3 | Wheel tire | 18R22.5/12R20 | front axle single tire/back axle dual tire | pcs | 18 |
| 1.4 | Driver's Cabin | cab with single driver | set | 1 | |
| 1.5 | Hydraulic jack | Y3030B | pcs | 4 | |
| 1.6 | Steering system | c/w steering pump, cylinder, pipeline etc. | set | 1 | |
| 1.7 | Suspention system | set | 1 | ||
| 1.8 | Transmission shaft | CZD | set | 1 | |
| 1.9 | fuel tank and air chamber | c/w dual fuel tank and air storage | set | 1 | |
| 2 | Diesel engine | C15 | power:550HP speed:1900r/min |
set | 1 |
| 3 | Transmission case | M5620AR | Max Power :700HP Max Speed : 2500rpm Max Torque : 3078N•m 6-FORWARD-1-REVERSE |
set | 1 |
| 4 | Transfer case | FD130 | max. torque: 13kN.m max input speed: 2100rpm |
set | 1 |
| 5 | Angle gear box | JCX150 | max. torque: 15kN.m max input speed: 2100r/min |
set | 1 |
| 6 | Drawworks | JC21 | rated input power: 550HP rated input speed: 450r/min Max fastline force: 210KN Brake Type: Hydraulic disc brake+auxiliary brake; crown saver inner circuilating cooling for brake rim Emergency drive motor 400V 50Hz |
set | 1 |
| 7 | Auxiliary brake | 5028-CM | MADE IN CANADA | set | 1 |
| 8 | Mast | JJ13533 | dual section mast, with front opening, c/w guyline and cylinders for raising and teslescoping max. load:1350kN effective height: 33m racking board capacity:2000m (4-1/2″DP) wind capacity:(no hook load and setback)110km/h c/w racking board, guyline, ladder and safety equipment |
set | 1 |
| 9 | Mast raising mechanism | Single telescopic cylinder; single raising cylinder | set | 1 | |
| 10 | Substructure | DZ180/6 | Structure type: parrallel; floor size:7.2×6(m) max. load:1800kN working height:6m clearance under rotary beam:4.8m DP capacity (4-1/2"DP)2800m |
set | 1 |
| 11 | Travelling system | conform with API 8A standard. drill line dia. :φ22mm max. hood load:1350KN |
set | 1 | |
| 11.1 | Crown block | TC135 | sheave no.:5 max. load:1350kN drill line dia.φ26mm |
set | 1 |
| 11.2 | Hook block | YG135 | max. load:1350kN sheave no. :4 |
set | 1 |
| 11.3 | Drilling line | φ26 | as per API Spec 9A Length: 380 meters |
set | 1 |
| 12 | Swivel | SL160 | swivel load:1600kN rated working pressure :35Mpa washpipe dia. :φ64mm |
set | 1 |
| 13 | Rotary table gearbox | XCDX | set | 1 | |
| 14 | Sloping chain box | set | 1 | ||
| 15 | Rotary table | ZP175 | open hole dia. :444.5mm(17 1/2") max. load: 3150kN |
set | 1 |
| 17 | Brake cooling circulation system | set | 1 | ||
| 18 | Pneumatic system | rated pressure: 0.85MPa c/w valves and pipeline (main parts imported). |
set | 1 | |
| 19 | Hydraulic system | rated pressure:14Mpa c/w valves and pipeline (main parts imported.) |
set | 1 | |
| 20 | Electrical system | carrier voltage:24V mast voltage:220V crown block c/w red alert lamp, mast, substrucutre and the rig c/w ex-proof lamp. |
set | 1 | |
| 21 | Standpipe | 4″ | joint | 1 | |
| 22 | Hose | 4″ | working pressure 35Mpa, 17 meters long | joint | 1 |
| 23 | Racking platform escaper | set | 1 | ||
| 24 | Climbing assistant device | set | 1 | ||
| 25 | Anti-falling device | set | 1 | ||
| 26 | Deadline anchor and weight indicator | JZ200 | set | 1 | |
| 27 | Elevator links | DH150 | set | 1 | |
| 28 | Hydraulic winch | IYJ3 | set | 1 | |
| IYJ5 | set | 1 | |||
| 29 | Drilling pipe V-door and catwalk way | Catwalk 2 pcs (total length 13.5m, height 0.8m),Pipe rack,Height : 0.8m; | set | 1 | |
| 30 | Mast base | set | 1 | ||
| 31 | Rig base | Entire boat base and mast base are connected by V type support , the forepart can be folded. | set | 1 | |
| 32 | Driller room | Driller room has windproof and warmth-preservation functions. Installing opened and disassembled integrally protective fence outside the glass window, removable and overturning protective fence on top viewing window and equipped with windscreen wiper; The body has good sealing. Drawworks drum, hydraulic, rotary table, diesel engine throttle, flameout, drum emergency brake, air slips, crown-saver, hydraulic winch, clamp cylinder and oil pump are controlled in the room. The worktop is reasonable layout, easy to operate. All liquid-gas pipeline arranged out centrally, set identifier, and easy to install.Five-way valve is located outside of the driller room. | set | 1 | |
| 33 | Instrumentation at Driller's Console |
Weight indicator, stand pipe pressure gauge, torque indicator, speed indicator, hook position indicator, tongs pull indicator, mud pump stoke totalizer, mud pit volume totalizer, mud flow rate indicator and trip tank level indicator | set | 1 | |
| 34 | The reverse winding mechanism of wireline | Drive type: Electrical or pneumatic motor.Wireline capacity: 1500 m Minimum input torque: 8 kN*m | set | 1 | |
| 35 | Kelly | 3 1/2" | joint | 1 | |
| 36 | Master bushing | 2 3/8"-5 5/8" four pin drive | set | 1 | |
| 37 | Roller kelly bushing | 3 1/2" 4 1/2" | set | 1 | |
| K | Assembly & test cost | set | 1 | ||
| L | Painting & Packing cost | set | 1 | ||
| M | Documents | set | 1 | ||
| N | Factory to the port freight | set | 1 |
){kind=link}