3000m 750HP Workover Rig Mine Water Hydraulic Truck Mounted Oil Drilling Rig

Product Description

Rig Model		ZJ15CZ	ZJ20CZ	ZJ30CZ	ZJ40CZ
NO.	ITEM	Specification	Specification	Specification	Specification
1	Installed Power	540HP (402KW)	630HP (470KW)	630 HP2 (470 KW2)	630 HP2 (470 KW2)
2		1350kN	1580kN	2250kN	2250kN
	Hook Load
3		500kN	700KN	1150KN	1150KN
	Drill String Load
4		450HP	600HP	1000HP	1000HP
	Drawworks Rated Power
5		Hydraulic+Mechanical	Hydraulic+Mechanical	Hydraulic+Mechanical	Hydraulic+Mechanical
	Transmission Mode
6		108	128	1410	1410
	Drive Mode
7		1500m	2000m	4000m	4000m
	Nominal Drilling Depth (4 1/2"DP)
8		33m	35m	38m	38m
	Mast Height
9		4.5m	4.5m	6m	6m
	Rig Floor Height
10		26mm	29mm	32mm	32mm
	Wirerope Diameter

Detailed Photos

Product Description

 The workover rig is truck-mounted drilling equipment,which is based on  sinotruck  ZZ1167M4611W truck second class chassis. it is mainly consists of sub-frame, PTO, hydraulic torque converter, drawworks and its brake system, angle gearbox, duplex telescoping mast, travelling system, weight-indicator, air system and electrical system .the maximum hook load is 360k N, mast height is 18m, the workover depth is 1600m  (73mmEUE) .     Power system: the vehicle is powered by  WD615.87 engine, then the power transfer to drawworks through  PTO of full power, hydraulic torque converter, transmission shaft and angle gearbox. the drawworks drive the crown block and hook with wireline to realize oil pipe up and down.     Mast assembly:Double telescopic mast, hoisting and telescoping with hydraulic cylinder; the angle is 5.5°and adjusted with adjusting screw; the crown block is who le-box type structure with guardrail.     Drawworks assembly: single-drum structure, the maximum fastline pull is 100k N, band brake.     Hydraulic and pneumatic control system: hydraulic system is used for adjusting jack, lifting oil cylinder, telescoping oil cylinder, support cylindern and hydraulic tong; pneumatic system is used for controlling drawworks clutch, emergency brake cylinder and engine throttle.

Product Parameters

Item	SUBJECT	SPECIFICATION	DESCRIPTION
Section A:Main Summary
		Repair well depth	1600m/5249ft  (73mmEUE)
		Rated hook load	200k N
		Max. hook load	360k N
		Engine rated power	199kW
		Mast height	18m
		Traveling system	2×3
		Wireline Dia	19mm
		Max. fastline pulling force	100k N
Section B :Requirements of main assemblies
	Truck chassis	Model	ZZ1167M4611W  Brand: HOWO
		Drive Type	4*2
	Truck chassis	Engine model	WD615.87
			(stage II emission regulation, with variable-speed
			governor
		Transmission model	FULLER 9 speed transmission, 9 drive 1 reverse.
		Wheel base of chassis	4600 mm

 

Certifications

 

 

FAQ