Oil Well Onshore Drilling Rigs Drilling Equipment Workover Rig Xj250 Xj350 Price

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: Workover rig
• Condition: New
• Motor: DC Motor
• Drill Hole Diameter: 250-300mm
• Drill Hole Depth: >300m
• Bit Type: Cone Bit
• Drilling Way: Compound
• Production Capacity: 50PS/Year

Product Description

 

Product Description

PRODUCT SPECIFICATIONS
Workover single drum rig is designed and manufactured according to the principle of " advanced performance, reliable operation, convenient mobilization, economical operation and meeting HSE requirement ". The performance and quality has reached or are beyond the advanced level of international similar workover rigs and confirming all the related APIs.

 Hydraulic system
Function: the hydraulic system is used for Leveling jacks, mast-raising oil tank, mast telescoping oil tank, workover hydraulic clamp.

Air system
The pneumatic system mainly consists of air supply, engine throttle, and drawworks air control systems. air supply system adopt gas source of vehicle and is equipped with FRL Combination.
Air control valve of the main drum is installed in the operation room and used to control the clutch of main drum, operation room is equipped with the control valve of main drum, draw works emergency braking valve, a crash-proof reset valve,
 
Electrical system

 Lamps circuit for chassis: 24v
 Install side marker light according to GB4785, GB7258, and other compelling standard requirements.
 1 direct current 24 v light for the collar is supplied.

 

Description	XJ350 Workover Rig (Overhaul)		XJ350 Workover Rig (Servicing)
Workover Depth	3,200m (10,500ft, 2-7/8″DP)2,500m (8,200ft, 3-1/2″DP)
Servicing Depth	4,000m (13,120ft, 2-7/8″EUE Tubing)
Rated Hook Load	600kN (134,900 lbf)
Max. Hook Load	900kN (202,330 lbf)
Traveling System	3×4 {Φ26mm (1'') Wireline}
Hook Hoisting Speed	0.25~1.4m/s (0.82~4.6ft/s)
Overall Dimensions(l×w×h)	18.5×2.9×4.2m60.7ft×9.5ft×13.8 ft	18.5×2.85×4.2m60.7×9.4×13.8ft
Total Weight	51,000kg (112,440 lb)	49,500kg (109,130 lb)
Max. Travel Speed	45km/h (28mil/h)
Carrier	Self-propeller 10×8
Engine Model andRated Power	CatC9260kW (350hp)/2100rpm	Detroit S6063298kW (400hp)/2100rpm
Transmission	Allison 4700 OFS	Allison M5610s
Mast Height	31.7m (104ft)
Max. Static Load	900kN (202,330 lbf)
Racking Board Capacity	4,000m (13,120 ft, 2-7/8″EUE Tubing)
Racking board Height	16.8m (55 ft)
Drawwork Rated Power	224kW (300hp, Double drum)	238kW (320hp)
Main Drum	Φ406×890mm (Φ16″×35'')	Φ429×965mm (Φ16.9″×38'')
Max. Faster Line Pull	180kN (40,470 lbf )
Sanding Drum	Φ965×264mm (Φ38″×10.4'')
Air Assist Brake System	KOBELT Disc4-7-35″ Caliper 5026-CM	KOBELT Disc4-7-48″ Caliper 5026-CM
Drill Floor (l×w×h)	4.2×4.2×3.7m (13.8×13.8×12.1 ft)
Swivel Model and Max. Load	SL90 900kN (202,330 lbf)
ZP125 Rotary Table	Max. Load 900 kN (202, 330 lbf Max. Open Dia. 292mm (11.5")

Description	XJ250 Workover Rig (Overhaul)	XJ250 Workover Rig (Servicing)
Workover Depth	3,200m(10,500ft, 2-7/8'' DP)	2,000m(6,560ft, 2-7/8'' DP)
Servicing Depth	3200m (10,500ft, 2-7/8''EUE Tubing)
Rated Hook Load	400kN (90,000 lbf)
Max. Hook Load	735kN (165,000 lbf )	675kN (151,700 lbf)
Traveling System	3×4 {Φ22mm (7/8'') Wireline)
Hook Hoisting Speed	1.5m/s (4.92ft/s)
Overall Dimensions(l×w×h)	18.5×2.9×4.2m60.7×9.5×13.8ft	16.5×2.9×4.2m54.1×9.5×13.8ft
Weight	50,000kg (110,230 lb)	45,000kg (99,200lb)
Max. Travel Speed	60km/h (37mph), but limit 45km/h(28mph)
Carrier	Self-propeller 10×8	Self-propeller 6×4
Engine Model and Rated Power	CatC9/ATAAC260kW(350hp/2100rpm)
Transmission	Allison 4700 OFS
Mast Height	31m (102ft)	27m (89ft)
Max. Static Hook Load	735kN (165,000 lbf)	675kN (151,700 lbf)
Racking Board Capacity	3200m (10,500 ft, 2-7/8'' EUE TB)
Racking Board Height	20.1m (66 ft)	16.8m (55ft)
Drawwork Rated Power	185kW (250hp, Double drum)
Main Drum	Φ336×828mm (Φ13.2'' ×32.6'')
Max. Faster Line Pull	145kN (32,600 lbf)
Sanding Drum	Φ315 mm×908mm (Φ12.4'' ×35.7'')
Air Assist Brake System	KOBELT Disc 4-7-35'' Caliper 5026-CM
Drill Floor (l×w×h)	4.2×4.2×3.3m (13.8×13.8×10.8 ft)
Swivel Model and Max. Load	SL90 900kN (202,330 lbf)
ZP125 Rotary Table	Max. Load 900kN (202,330 lbf) Max. Open Dia. 292mm (11.5'')

 

Company Profile

Packaging & Shipping

 

Our Advantages

Where You Need Us Where We Are?
1. We provide professional engineers to go abroad on work site to provide after-sale service.2. Every group with professional
translators so language don't worry
3. We normally provide 1 year warranty after delivery, but if for some urgent spares, we will send by air
4. We now provide service in Azerbaijan, Argentina,Russia, Egypt, India, Kazakhstan.