| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical Specification for ZJ40 Trailer-mounted Drilling Rig | ||||||
Item |
Name |
Model | Technical Specification |
Unit |
Qty |
|
| I | Main Unit |
ZJ40 | :-20ºC~+55ºC Operating temperature range: -20ºC~+55ºC |
set |
1 | |
Main Rig |
Including trailer, power system, engine, transmission system consists of one hydraulic torque converter, angle gear, transfer case, double drum drawworks, clutches assembly, rotary table, auxiliary brake, chain driving device, mast and crown block assembly, telescoping cylinders, hydraulic cathead, raising cylinders, double hydraulic winches, hydraulic system, pneumatic system, operation system, crown saver device, electrical system, substructure, mud boat and etc. | |||||
| Max. drilling depth: 4000m (4-1/2" DP) 3500m (5" DP) Driving way: trailer :16000mm×3400mm×2900mm() Overall dimension: 16000mm×3400mm×2900mm (w/o mast) :22500mm×3400mm×4490mm Transportation dimension: 22500mm×3400mm×4490mm :825000kg Total weight: 825000kg |
||||||
| 1.1 | Carrier |
Drive type: 14×10 Max. speed (limit): 45km/h Slope gradient: 26% Approach angle/departure angle: 33°/18° Min. ground clearance: 311mm Turning diameter: 39m |
||||
| 1.1.1 | Frame |
CJ-02 | Including crossbeam assembly, front boarding, mud-guard, raising cylinder bracket, beam of hydraulic jack and etc. | set |
1 | |
| 1.1.2 | Suspension System |
Forth axle suspension device | set |
1 | ||
| 1.1.3 | Axle |
CQ | Foru suspension axles with brake cylinders of single/double air chamber(s) | set |
1 | |
| 1.1.4 | Tire |
12-20 | The rear four axles are double-wheel |
set |
1 | |
| 1.1.5 | Hydraulic Jack |
Y3030B | The whole hydraulic jacks assembly |
set |
4 | |
| 1.1.6 | Transmission Shaft |
CDZ-2 | The whole rig up and down transmission shaft and rotary table driving shaft |
set |
1 | |
| 1.1.7 | Oil Tank |
piece |
2 | |||
| 1.1.8 | Main Air Bag |
Max. pressure: 1.2MPa | piece |
1 | ||
| 1.1.9 | DC Electrical System |
Including starter electrical circuit, instrument electric circuit, lighting electric circuit, steering and control electric circuit, wiper electric circuit, foglight warning electric circuit and etc. | set |
1 | ||
| 1.1.10 | Lighting System |
Including headlight assembly, fog light, steering lamp, width lamp and instrument lamp | set |
1 | ||
| 1.2 | Engine |
CAT C18 | Power: 630HP×2 Rotating speed: 2100r/min Overall dimension: 1409.3mm×974.0mm×1256.1mm Weight: 1332kg Displacement: 18.1L Stroke: 183mm Equipped with high and low oil pressure, high water temperature and high rotating speed warning device and with machine oil heating unit, diesel heater, muffler and lubrication pressure separate sensor |
unit |
2 | |
){kind=link}