Xj-650 Workover Rig

Product Details
Customization: Available
After-sales Service: 1year
Warranty: 1 Year
Diamond Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
3000000 RMB
Plant Area
101~500 square meters
  • Xj-650 Workover Rig
  • Xj-650 Workover Rig
  • Xj-650 Workover Rig
  • Xj-650 Workover Rig
  • Xj-650 Workover Rig
  • Xj-650 Workover Rig
Find Similar Products

Basic Info.

Model NO.
XJ650
Motor
Diesel
Drill Hole Diameter
250-300mm
Drill Hole Depth
>300m
Bit Type
Diamond Bit
Drilling Way
Rotary
Transport Package
Export Packing
Trademark
Beyond Petroleum
Origin
China
HS Code
8431431000

Product Description

Xj-650 Workover Rig
No.   Name                        Model                            Technical Specification                                                                                       Unit  Qty
  Drilling Rig  ZJ-20 (drilling depth): 2000m (4-1/2" DP)     
(max. hook load): 1600KN
(rated power): 630HP
(mast height): 35m
(racking board height): 19m, 21m, 22m
(traveling system):  5×4
(carrier drive): 12×8
(drill line dia.):φ29mm
(outline size): 21×3.2×4.5m
(max. drive speed):  45km/h
(main rig unit working temp): -15ºC----45ºC
, Main rig         
1 Carrier 12×8  (carrier drive): 12×8    
(climbing degree): 26%
/(approaching/depart angle): 26°/18
(clearance): 311mm
(min. turning radiu): 19.5m     
1.1 Truck frame   ,,,   c/w frame, mud fender, raising cylinder base and hydraulic jack beam.  set 1
1.2 Axle CQ   joint 6
1.3 Wheel tire 18-22.5/12R20  front single tire/ back dual tire pcs 20
1.4 Driver's Cabin    cab with single driver  set 1
1.5 Hydraulic jack Y3030B   pcs 4
1.6 Steering system   ,,,  
c/w steering pump, cylinder, pipeline etc.
set 1
1.7 Suspention system      set 1
1.8 Transmission shaft CZD    set 1
1.9 fuel tank and air chamber    c/w dual fuel tank and air storage  set 1
2 Diesel engine C18 (power):630HP   set 1
(speed):1900r/min
3 Transmission case M6620AR  :700HP;  :  2500rpm ;  :  3078N•m
Power: 700HP; Max. Speed: 250rpm; Max. Torque: 3078N.m
 set 1
4 Transfer case FD130 (max. torque): 13kN.m  set 1
(input speed) : 2100rpm
5 Angle gear box JCX150 (max. torque): 15kN.m  set 1
(input speed): 2100r/min
6 Drawworks JC21 (input power): 650HP  set 1
(input speed): 450r/min
(fastline force): 210KN
 :+ (band brake+auxiliary brake)
: (crown saver)
 inner circuilating cooling for brake rim
7 Auxiliary brake  5028-CM 4-10-38.5  set 1
8 Mast  JJ16035 ,,,,,.    dual section mast, with front opening, c/w guyline and cylinders for raising and teslescoping     (max. load):1600kN                                                   set 1
 (efficient height):35m                         
(racking board capacity):2000m(4-1/2″)                           
(wind capacity):(, no hook load and setback)110km/h                     
:,,, c/w racking board, guyline, ladder and safety equipment
9 Mast raising mechanism   , Double telescoping cylinder; double-raising cylinder  set 1
10  Substructure DZ180/6  : foldable substructure   1
 floor size:7.2×6(m)
(max. load):1800kN
 working height:6m
 clearance under rotary beam:4.8m
 DP capacity (4-1/2")3000m
11 Travelling system   API Spec 8A(5×4) conform with API standard.  drill line dia. :φ29mm; 
 max. hood load:1600KN
 set 1
11.1 Crown block TC160  sheave no.:5  set 1
max. load:1600kN
 drill line dia.φ29mm
11.2 Hook block YG160 max. load:1600kN  set 1
 sheave no. :4
11.3 Drilling line φ29 : 460API Spec 9A 460 meters long  set 1
12 Swivel  SL160  swivel load:1600kN   set 1
 rated working pressure :35Mpa
 washpipe dia. :φ64mm
13 Hydraulic cathead  Y15160 :100KN connect force  set 2
:150KN break force
14 Rotary table gearbox XCDX    set 1
15 Sloping chain box    set 1  
16 Rotary table ZP205  open hole dia. :520.5mm(20 1/2")  set 1
 max. load: 4450kN
17 Brake cooling circulation system      set 1
18 Pneumatic system    rated pressure:  0.85MPa;
 c/w valves and pipeline (main parts imported).
(
)
 set  
19 Hydraulic system   rated pressure:14Mpa;
. c/w valves and pipeline (main parts imported).
(
)
 set 1
20 Electrical system    carrier voltage:24V;
 mast voltage:220V;
,,, crown block c/w red alert lamp, mast, substrucutre and the rig c/w ex-proof lamp.
 set 1
21 Standpipe 4   joint 1
22 Hose 4 : 35MPa,  17m working pressure 35Mpa, 17 meters long joint 1
23 Racking platform escaper      set 1
24 Climbing assistant device      set 1
25 Anti-falling device      set 1
26 Deadline anchor and weight indicator& JZ250    set 1
27 Elevator links DH250    set 1
28 Hydraulic winch YJ3C    set 1
    YJ5B    set 1
29 Drilling pipe V-door and catwalk way  set    set 1
30 Mast base      set 1
31 Rig base      set 1
Xj-650 Workover RigXj-650 Workover RigXj-650 Workover RigXj-650 Workover RigXj-650 Workover RigXj-650 Workover RigXj-650 Workover Rig

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier