| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
We can provide truck-mounted deepwater well drilling rigs from 300 meters to 1,000 meters. The drilling rig is a rotary drilling rig by rotary table, which can choose special truck chassis such as SINOTRUK Howo or Dongfeng. The main components like drilling rig prime mover diesel engine, dual hydraulic winch unit, mud pump, rotary table, drilling tower, driving drill pipe, etc. are all installed on the same chassis, which is easy to transport and mobilize. By appropriate drilling tools, this drilling rig can achieve a variety of drilling methods, such as positive mud circulation, air foam drilling, air hammer drilling, air lift reverse circulation drilling, etc., to adapt to different formations.
BT600 truck-mounted water well riling rig is truck-mounted rotary drilling rig. The drilling rig adopts the chassis of SINOTRUK 8 x 4 special vehicle.
The diesel engine, double hydraulic winches, mud pump, rotary table, mast, kelly are all installed on the chassis.
It equipped with independent 132KW/2200rpm diesel engine for drilling, and install generator set (MF)to provide night lighting or welding maintenance at the construction site.
According to the local geological conditions, BT600 drilling rig can drill with mud, DTH hammer, air foam and hydro-hammer.
It is highly adaptable to the stratum structure and can be used for drilling in clay, sand, highly weathered rock, bedrock, basalt and other strata.
This rig has very compact structure, the engine of chassis is adopted D10.27-40 diesel engine, the power is 196kw(strong power) The drilling rig has independent diesel engine (COMMINS 6BTA5.9-C180), the power is 132kw. Not only meet the drilling requirements, but also reduce energy consumption, it is very affordable.
This rig is design principle is an advanced hydraulic cylinder for drilling, stepless lift, it can be achieved automaic drilling. it can automatically adjust the drilling speed for different geological conditions.
The drilling process can be achieved in pressruized drilling technology, adjust different pressure for different geological conditions, and can be viewed drilling pressure by pressure gauge. At the same time, it can adjust the drilling speed.
The drilling rig can achieved fast drilling by manually, especially for soil. It can achieved different speed for different soil.
It has a large lifting force hydraulic main hoist, stepless lift, and to achieve release rope quickly. When upgrading heavy, the lifting speed need slow to aviod crash the turntable and wellhead board. When put down single drill pipe, operate the quick handle, it can achieved release rope quickly like mechanical hoist.
It has a hydraulic tool hoist, the tool hoist has large lifting force and quick lifting speed, it is both easy to loading drill tools, drill pipe and drill accessories transport, and can slide up and down with anchors, its very convenient to load and unload the drill pipe.
It has a hydraulic cylinder control double card board forward and backward, it makes the insurance card board closed, to achieve stuck or release the pipe joints.
It use integrated design of pneumatic, to achieve the 3NB-130 mud pump clutch using pneumatic remote control, it has high degree of automation and easy-saving operation.
It is installed 4 hydraulic legs and 2 mechanical legs, every hydraulic leg rod with locknut. After leveling the rig, it can lock the cylinder use locknut. So, even if the cylinder leaks, the chassis is not instability.
The turntable use stir bars, internal turntable use spiral arc gear to transmission, it has large torque, it about 2 times of similar products at domestic and foreign.
It is installed a generator (30kw) , so that it is convenient to illuminate or work at night.
The hydraulic system use open system, the chassis and drilling rig are separately manipulated, it can avoid misuse. Winter oil heater and summer oil radiator are installed, to adapt to different seasons hydraulic oil for heating and cooling.
| Technical parameter | |||
| Drilling depth(M) | 600 | ||
| Drilling diameter(mm) | 500 | ||
| Speed of turntable(r/min) | 110;96;56;36;21;12(reverse) | ||
| Torque of turntable(KN.m) | 4.3,5,8.5,13.,22.7,40(reverse) | ||
| The capacity of oil pump (KN/mpa) | 245/20 | ||
| The feeding force of oil pump (KN/mpa) | Oct-59 | ||
| The single rope capacity of main windlass(KN) | 50 | ||
| The lifting capacity of main hook(KN) | 300 | ||
| The single rope capacity of tool windlass(KN) | 20 | ||
| The single rope capacity of tool hook(KN) | 20 | ||
| The height of mast (mm) | 11800 | ||
| Bearing capacity (t) | 36 | ||
| Pipe | Kelly (mm) | 108×108×7500 | |
| Assistant pipe (mm) | Ф89×10×5500 | ||
| BW850/2Amud pump | Theory of flow (L / min) | 600 850 | |
| Rated pressure (Mpa) | 3 2 | ||
| Pounding times (min-1) | 58 82 | ||
| Diameter of suction tube (mm) | 127 | ||
| Diameter of drain pipe (mm) | 64 | ||
| Input speed (r / min) | 470 | ||
| Input power (kw) | 40 | ||
| Overall dimensions (mm) | 2000*1030*1400 | ||
| Weight (t) | 1.5 | ||
| Drilling Power | diesel engine | COMMINS 6BTA5.9-C180 | |
| Power(KW) | 132 | ||
| Speed (r/min) | 2200 | ||
| Out-put Torque(KN.m) | 750Nm/1300 rpm | ||
| Truck chassis | Model | SINOTRUK | |
| Drive form | 8×4 | ||
| Engine | Model | D10-27-40 diesel engine | |
| Rated power(KW) | 196 | ||
| Speed (r/min) | 2200 | ||
| Electric generator | Model | MF | |
| Rated power (kw) | 30 | ||
| Rated voltage(v) | 400 | ||
| Rated current(A) | 27 | ||
| Speed (r/min) | 1500 | ||
| Frequency(Hz) | 50 | ||
| Protection level | IP21 | ||
| Insulation Class | H | ||
| Transport size(L*W*H)(mm) | 12725×2490×4208 | ||
| Working size(L*W*H)(mm) | 11825×5374×14008 | ||
){kind=link}